Table of Contents
Advertisement
for your retry. You can press MENU/EXIT to cancel the change or try
another password.
Though the password function is disabled, you need to keep the old
password in hand should you ever need to re-activate the password function
by entering the old password.
Switching input signal
The projector can be connected to multiple devices at the same time.
However, it can only display one full screen at a time.
Be sure the Quick Auto Search function in the Source menu is On
(which is the default of this projector) if you want the projector to
automatically search for the signals.
You can also manually cycle through the available input signals.
1.
Press SOURCE on the projector or press input source directly from
the remote control. A source selection bar displays.
2.
Press ▲/▼ until your desired signal is selected and press MODE/
ENTER.
Once detected, the selected source information will display on the
screen for seconds. If there is multiple equipment connected to the
projector, repeat steps 1-2 to search for another signal.
• The brightness level of the projected image will change accordingly when
you switch between different input signals. Data (graphic) "PC"
presentations using mostly static images are generally brighter than
"Video" using mostly moving images (movies).
• For best display picture results, you should select and use an input signal
which outputs at this resolution. Any other resolutions will be scaled by
the projector depending upon the 'aspect ratio' setting, which may cause
some image distortion or loss of picture clarity. See
ratio" on page 36
Changing Color Space
In the unlikely event that you connect the projector to a DVD player via the
projector's HDMI input and the projected picture displays wrong colors,
please change the color space.
To do this:
1.
Press MENU/EXIT and then press ◄/► until the SOURCE menu is
highlighted.
2.
Press ▼ to highlight Color Space Conversion and press ◄/► to
select the setting.
This function is only available when the HDMI input socket is in use.
Operation
for details.
"Selecting the aspect
35
Advertisement
Table of Contents
