BenQ MW853UST+ User Manual page 58

FUNCTION
Picture Mode
Reference
Mode
Brightness
Contrast
Color
Tint
Sharpness
Brilliant
Color
Color
Temperature
Color
Temperature
Fine Tuning
3D Color
Management
Reset picture
settings
58 Operation
DESCRIPTION
Pre-defined picture modes are provided so you can
optimize your projector image set-up to suit your
program type.
See "Selecting a picture mode" on page 39
Selects a picture mode that most suits your need for the
image quality and further fine-tune the image based on the
selections listed on the same page below.
See "Setting the User 1/User 2 mode" on page 40
details.
Adjusts the brightness of the image.
See "Adjusting Brightness" on page 40
Adjusts the degree of difference between dark and light in
the image. See "Adjusting Contrast" on page 40
details.
Adjusts the color saturation level -- the amount of each
color in a video image. See
for details.
The function is only available when Component,
Video or S-Video with NTSC system is selected.
Adjusts the red and green color tones of the image.
See "Adjusting Tint" on page 40
The function is only available when Video or S-
Video with NTSC system is selected.
Adjusts the image to make it look sharper or softer.
See "Adjusting Sharpness" on page 40
The function is only available when Component,
Video or S-Video with NTSC system is selected.
Adjusts white peaking while maintaining correct color
presentation. See
for details.
See "Selecting a Color Temperature" on page 41
details.
See "Setting a preferred color temperature" on page 41
for details.
See "3D Color Management" on page 42
See "Resetting current or all picture modes" on page 43
for details.
"Adjusting Color" on page 40
for details.
"Adjusting Brilliant Color" on page 41
for details.
for
for details.
for
for details.
for
for details.