Invertec 270Sx - Case Cover Removal - Lincoln Electric INVERTEC 270SX Service Manual

INVERTEC
Procedure:
1. Turn on/off switch to off position.
2. Disconnect Input Power from the machine !
3. Remove the 2 screws of the alluminum handle (A).
4. Remove the 16 screws of the plastic handle (B).
5. Remove the 4 screws on the rubber corners (C).
6. Don't remove the 4 bottom rubber corners
7. Pull up the red case cover.
8. Follow the next session to perform the input filter discharge procedure
®
270SX - CASE COVER REMOVAL
A
B
C
Page 24
A