Layout; Items Supplied - Parkside ZKGS 2100 UG Operation And Safety Notes

Anleitung_4300696:_ 10.07.2009
GB/IE/
CY
re-attached immediately after having repair
or maintenance work done.
The safety, work and maintenance
instructions from the manufacturer, as well
as the measurements in the technical data,
must be observed.
It is imperative to observe the accident
prevention regulations in force in your area
as well as all other generally recognised
rules of safety.
Note the information published by your
professional organisation (VBG 7j).
Operation in a closed room is only
permitted with an appropriate vacuum
extractor unit.
The crosscut saw must be plugged into a
shock-proof socket with a minimum of 10A
fuse protection.
Do not use inefficient machines for heavy
duty work.
Exercise caution when working vertically.
Important: Take particular care when
cutting mitres.
Keep the safety instructions in a safe place

3. Layout

1. Handle
2. ON/OFF switch
3. Release lever
4. Saw shaft lock
5. Machine head
6. Movable blade guard
7. Saw blade
8. Clamping device
9. Workpiece support
10. Locking screw for workpiece support
11. Table insert
12. Latched position lever
13. Locking grip
14. Pointer
15. Scale
16. Turntable
17. Fixed saw table
18. Additional stability bar
19. Stop rail
20. Scale
21. Pointer
14
12:31 Uhr Seite 14
22. Sawdust bag
23. Locking screw
24. Locking screw for drag guide
25. Safety pin
26. Drag guide
27. Knurled screw for cutting depth limiter
28. Stop for cutting depth limiter
29. Adjustment screw (90°)
30. Adjustment screw (45°)
31. Flange screw
32. External flange
33. Laser
34. ON/OFF switch for laser
35. Battery compartment
36. Battery compartment cover
37. Screws for adjusting the laser
38. Internal flange
a) 90° stop angle (item not supplied)
b) 45° stop angle (item not supplied)
c) Wrench
d) Counternut
e) Thread chuck

4. Items supplied

Drag, crosscut and mitre Saw
2 x clamping device (8)
2 x workpiece support (9)
Sawdust bag (22)
Allen key
Wrench (c)
Additional stability bar (18)
2 x Battery (1.5V LR6)
Locking grip (13)