Loading Camera Settings; Loading Camera Settings When Camera Power Is On; Camera Settings Initialization - Omron STC-MBS122BPOE Product Specifications And User's Manual

Loading Camera Settings

ROM
UserSet 0 to 7
ROM
Default
UserSetSelector
Setting Procedure
1. Select "UserSet X" (or Default) at "UserSetSelector"
2. Execute "UserSetLoad"

Loading Camera Settings when Camera Power is on

ROM
UserSet 0 to 7
ROM
Default
UserSetDefault
Setting Procedure
Set "UserSet X" or "Default" at "UserSetDefault"
1.

Camera Settings Initialization

Please follow the procedure in below for camera settings put back to factory default settings.
Setting Procedure
Selects "Default" at "UserSetSelector".
1.
Executes "UserSetLoad".
2.
Select "UserSet X" at "UserSetSelector".
3.
Executes "UserSetSave".
4.
STC-MBS122BPOE / STC-MCS122BPOE
Product Specifications and User's Guide
Camera
Settings
Selector
Camera
Settings
Selector
When executing "UserSetLoad",
camera settings load from selected ROM
that was selected at "UserSetSelector" to
register at RAM.
When the camera power is on,
camera settings load from selected ROM
that was selected at "UserSetDefault" to
register at RAM.
No.19S207-00
37/73