Transport, Storage And Disposal; Venting The Appliance - Melitta CI Touch F630-III Operating Instructions Manual

Transport, storage and disposal

Changing the water filter
Change the water filter when the appli-
ance requests you to do so.
Requirement:
ū The appliance is ready for operation.
ū A container (0.7 l) is placed beneath the
spout.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Change
filter menu.
3. Select Start and confirm your selection.
4. Follow the further instructions on the
display.
Removing the water filter
The water filter should not be left standing
dry for a long period of time. When it is
not used for a long time, we recommend
storing the water filter in a vessel filled
with tap water in the refrigerator.
Requirement: The appliance is ready for
operation.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Remove
filter menu.
3. Select Start and confirm your selection.
4. Follow the further instructions on the
display.
» The water hardness is automatically
reset to the previous setting.
» The appliance is ready for operation.
50
10 Transport, storage and
disposal

10.1 Venting the appliance

We recommend venting the appliance
when it is not used for a long period, prior
to transport and when there is a risk of
frost.
During venting, residual water is removed
from the appliance.
Requirements:
ū The water filter is removed.
ū The appliance is ready for operation.
1. Place a vessel beneath the outlet.
2. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
3. Navigate to the System > Venting menu.
4. Select Start and confirm your selection.
5. Follow the further instructions on the
display.
» The appliance heats up.
» The appliance is vented and then
switches off completely.