Transport, Storage And Disposal - Melitta CI E970-103 Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 22
Removing the water fi lter
The Melitta
PRO AQUA fi lter cartridge
®
should not remain dry over an
extended period of time. It is therefore
recommended to store the Melitta
PRO AQUA fi lter cartridge in a glass
of water in the refrigerator when the
appliance will not be in use for extended
periods.
■ Flip up the lid of the water tank 6.
■ Pull the water tank 6 up and out of the
appliance.
■ Unscrew the water fi lter from the thread
on the base of the water tank.
■ Reinsert the water tank 6.
■ Call up the Care sub-menu.
■ Select Filter in the menu.
■ Select Remove fi lter in the menu.
■ Select Start in the menu.
■ The prompt "Filter has been removed,
set water hardness" is shown appears
on the text display 4.
■ Set water hardness (Page 31).
Transport, Storage and
Disposal
Venting the appliance
WARNING
There is a risk of burn injuries and
scalding due to hot steam and the
hot steam pipe!
The appliance releases hot steam
when it is vented.
▶ Never allow any part of your body,
e.g. your face to come into contact
with the hot steam.
Operating Instructions: Melitta
It is recommended to vent the appliance
if it will not be used for an extended
period of time and before transport. This
also protects the appliance against frost
damage.
®
■ Remove the water fi lter if necessary
(Page 37).
■ Place a vessel under outlet 3.
■ Call up the System sub-menu.
■ Select Venting in the menu.
■ Select Start in the menu.
■ Flip up the lid of the water tank 6 and
pull the water tank 6 up and out of the
appliance.
■ Connect the tube to the drip tray and to
the outlet (Image D).
■ Press the rotary switch 10 to confi rm.
The appliance heats up.
■ The appliance is vented and then
switches off completely.
Transport
■ Vent the appliance.
■ Empty and clean the drip tray and coffee
grounds container.
■ Empty the water tank and th bean
container. If necessary, vacuum out
beans that are stuck at the bottom.
■ Secure loose parts (cup plate etc.) with
suitable adhesive tape.
■ If possible, transport the appliance in
the original packaging including the hard
foam elements.
Disposal
This appliance is labelled according to
the European Directive 2002/96/EC on
waste electrical and electronic equipment
(WEEE). The Directive prescribes the
framework for a EU-wide applicable return
and recycling of waste appliances. Please
contact a specialised dealer for current
disposal procedures.
CI
| 1834-0618 | 2018-08
®
®

Transport, Storage and Disposal

37

Advertisement

Table of Contents
loading

Table of Contents