Making Calls - Mitel 6905 SIP User Manual

Phoning

Making calls

This section explains how to set your calls.
Answering, ending or rejecting a call
Answering a call: The phone rings and the message LED and line key
LED flash. If the caller's phone number or name is received, it is shown on
the display. If the phone number is stored in the private phone book or in
the MiVoice Office 400 communication system, the display also shows the
corresponding name.
Rejecting a call: As long as you have not answered a call, you can reject
it during the ringing phase.
Answering a call with the handset:
Pick up the handset.
Answer a call with the line key
Press the line key and pick up the handset.
Ending a call:
Put the handset on-hook or press the End key.
Rejecting a call:
Press the End key during the ringing phase.
The connection is rejected and, depending on the system configuration, the
caller either hears the busy tone or is forwarded to a preconfigured destination.
Using your phone in hands-free mode
You want other people to join the conversation or to have your hands free
while making the call.
The hands-free mode function activates the loudspeaker and the micro-
phone. Make sure the hands-free microphone is not obstructed. The
sound quality is improved if you set the volume of your phone to a low set-
ting.
Automatic hands-free mode
you to answer a call without picking up the handset or pressing a key. The
following settings are available. This function Automatic hands-free can
only be activated/deactivated by your system administrator in the MiVoice
Office 400 communication system.
24
1)
: The function Automatic hands-free allows
Mitel 6905 SIP / Mitel 6910 SIP
Version 1.0/ – R7.0 – 12.2021