Making Calls - Mitel MIVOICE OFFICE 400 6920 SIP User Manual

Making calls

This section explains how to set your calls.
Answering, ending or rejecting a call
Answering a call: The phone rings and the message LED and line key
LED flash. If the caller's phone number or name is received, it is shown on
the display. If the phone number or user picture is stored in the private
phone book or in the MiVoice Office 400 communication system, the dis-
play also shows the corresponding name or the corresponding picture.
Open listening: With the open listening mode function, the loudspeaker is
activated in addition to the handset so that other people in the room can
listen to the call.
Rejecting a call: As long as you have not answered a call, you can reject
it during the ringing phase.
Deflecting a call: As long as you have not picked up a call, you can
deflect it to another call number.
Silencing a call: You can silence the ringing of an incoming call, but it is
still signaled optically and you can answer it in the normal way.
Answering a call with the handset:
Pick up the handset.
Answer a call with the line key
Press the line key and pick up the handset.
Answering a call with the softkey
Press the
Open listening during a call:
Activate: Press the loudspeaker/headset key.
Deactivate: Press the loudspeaker/headset key again.
Ending a call in open listening mode:
Press the loudspeaker/headset key and put down the handset.
Note: If you merely replace the handset, the phone switches to the hands-free mode.
Ending a call:
Put the handset on-hook or press the End key.
Mitel 6920 SIP
eud-1763/2.1 – R6.0 – 10.2018
Answer softkey and pick up the handset.
Phoning
27