Inspection - MULTIQUIP MVCe82VBW Operation Manual

One-way plate compactor
Table of Contents

Advertisement

BEFORE STARTING
1. Read safety instructions at the beginning of manual.
2. Clean the compactor, removing dirt and dust.
3. Check the air filter for dirt and dust. If air filter is dirty,
replace air filter with a new one as required.
4. Check fastening nuts and bolts for tightness. Loosened
screws or bolts due to vibration, could lead to
unexpected accident.
5. Make sure that the guard hook, belt cover and shock
absorbers are not damaged. If they are damaged,
replace new ones.
6. Replace any missing or damaged safety and operation
decals.
VIBRATOR OIL CHECK
1. To check the oil level, place the plate compactor on a
level surface with the power off.
2. Remove the oil plug and visually check the oil level
(Figure 3). The oil level should be up to the levelof
the oil plug.
Figure 3. Oil Check
3. If the oil level is low, fill up to the oil plug with the
recommended oil type (Table 7). Maximum oil capacity
is 0.148 quarts (0.14 liters).
PAGE 14 — MVCe82VBW COMPACTOR • OPERATION MANUAL — REV. #0 (02/01/24)
Table 7. Oil Type
Season
Temperature
Summer
25° C or higher
Spring/Fall
25° C - 10° C
Winter
0° C
BATTERY PACK AND BATTERY CHARGER
NOTICE
Follow the owner's manual provided with the battery
pack and battery charger for the following operations:
• Charging and Charge Level
• Cleaning
• Storage
• Disposal
NOTICE
Follow the owner's manual provided with the DC power
unit when attaching and removing the battery pack.

INSPECTION

Oil Type
SAE 10W-30
SAE 10W-30/20
SAE 10W-10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mikasa series

Table of Contents