Connecting Cables To The Monitor - Fujitsu P2711 Series Manual

Getting started

Connecting cables to the monitor

The data cables supplied have two 20-pin DP plugs or two 20-pin USB plugs for
connection to the monitor and to the computer.
Refer to the operating manual for the computer for information on the computer's ports and interfaces.
► Select the appropriate data cable for your computer.
► P series: Plug a data cable connector to the USB-C, HDMI or Display port socket on the monitor.
B Series: Plug one end of the data cable into the HDMI, Displayport, DVI or
VGA connector (B2711 Tx FHD) on the monitor.
The monitor automatically detects the input when only one signal source is connected.
A High Speed HDMI cable is needed for connection via HDMI.
► If you are not using the P-series USB-C port, plug the USB 3.0 cable supplied
(USB-A to USB-B) into the USB-B port socket (USB 3.2 Gen1, Upstream) and the
other end of the cable into a USB-A socket on the computer.
► Plug the network cable supplied into the socket on the monitor.
A lock (Security Lock) can be mounted in the security slot to protect the monitor
against theft. A Security Lock is not included with the monitor at delivery.
22 Fujitsu