Table of Contents
Advertisement
Operation
If the selected input signal does not deliver an image, the monitor
shall change this automatically.
In the following cases an automatic change of the input signal is disabled:
•
When the "Daisy-Chain" function is activated.
•
If the input signal for the "USB-C" monitor connection is selected and
the Power Button settings is set to "Computer".
Press the button
is not displaying an image and is in power-saving mode.
If on the USB-C upstream port a sheer USB data connection is detected, an
enlarged setting window will be displayed.
► Press the
/
► Press the
/
video signal.
The built-in KVM will be switched based on the assignments set.
For further information on the KVM function, please refer to chapter
"KVM feature", Page
40
To call up the INPUT settings window if the monitor
buttons to select the desired monitor port.
buttons to change the assignment of the USB upstream to the relevant
57.
Fujitsu
Advertisement
Table of Contents
