Getting started
Connecting the device
Please observe the safety information in
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
► Switch off the monitor and the computer.
► Disconnect the power plug from the computer.
Connecting cables to the monitor
The data cables supplied have two 20-pin DP connectors or two 24-pin DVI connectors
for connection to the monitor and to the computer.
Information on the computer connections and interfaces is contained in the
operating manual for the computer.
1
2
1 = Security slot for Security Lock
2 = Power connector
3 = Displayport
4 = DVI-D socket (DVI)
5 = D-SUB socket (VGA)
► Select the appropriate data cable for your computer.
16
3
4
"Important notes", Page
5
6
7
6 = AUDIO-IN socket
7 = AUDIO-OUT socket
8 = USB 2.0 (Downstream)
9 = USB 2.0 (Upstream)
7.
8
9
Fujitsu