Connecting Cables To The Monitor - Fujitsu SCENICVIEW A24W-3A Operating Manual

Connecting cables to the monitor

The monitor ports are protected by a cover.
► Remove the cover.
The data cables supplied have two 15-pin D-SUB connectors / two 24-pin DVI connectors for
connection to the monitor and to the computer.
► Select the suitable data cable for your computer.
Digital graphics card with DVI interface:
Graphics card with VGA interface:
Information on the computer connections and interfaces is contained in the operating manual
for your computer.
► Connect one of the connectors of the data cable to the D-SUB connector (4) or the DVI-D
connector (3) on the monitor and secure the plug-in connection by tightening the safety screws.
The monitor automatically detects the input when only one signal source is connected.
i
► Insert one plug of the audio line in the AUDIO IN (2) socket on the monitor and make sure it is
properly engaged.
► Plug the power cable supplied into the power connector (1) of the monitor.
► Mount the cover over the connections.
A lock (Kensington Lock) can be mounted in the security slot (5) to protect the monitor
i
from theft. A Kensington Lock is not included in the consignment of the monitor.
A26361-K1180-Z120-1-7619, edition 1
Downloaded from ManualMonitor.com Manuals
SCENICVIEW A20W-3A/A22W-3A/A24W-3A
1 = Power connector
2 = AUDIO-IN connector
3 = DVI-D connection socket (DIGITAL)
4 = D-SUB connection socket (ANALOG)
5 = Security slot for "Kensington Lock"
6 = Holes for fixing swivel arm or wall bracket
DVI connector
D-SUB connector
11