Table of Contents
Advertisement
Network port
The P-line models feature an integrated RJ45 interface for Gigabit Ethernet.
Initial startup
► Install the network driver currently approved for your operating system. Please refer
to section
"Network drivers", Page 26
► Use a patch cable (cat-5 or better) to connect the network connection to the local network (LAN).
► Use one of the available USB Upstream ports to connect your system to the monitor.
The network connection will automatically be activated.
The network connection is split when the input signal is switched and connected to
the other USB Upstream port via the KVM feature. Accordingly, end any current data
transmissions or wait until they are complete before switching to avoid any loss of data.
The bandwidth of the network connection will be reduced to ~300 Mbit is the
OSD setting is changed from Daisy Chain to Advanced.
Wake On LAN (WOL)
The system can be launched by the monitor's network connection using a "Magic Packet". In order
to do so, you system needs to support Wake-on-LAN via an external USB network controller.
► Click on Network Adapters in the device manager and double click on the Realtek
USB GbE Family Controller device settings.
► Switch to the Power Management tab.
► Enable the options Allow this device to wake the computer and Only allow
a magic packet to wake the computer.
► Click on OK.
It is now possible to wake the system from standby mode (S3).
► With selected Fujitsu LIFEBOOK models, it is possible to wake the system
from a shutdown states (S5).
Enable all-in-one mode. Please refer to section
operation", Page 58
► Enable Wake on LAN from USB Type-C Port Replicator in the system BIOS under the Advanced menu.
It is now possible to wake the system from a shutdown state (S5).
MAC Address Pass Through (MAPT)
With selected Fujitsu LIFEBOOK (9th generation onwards), it is possible to transfer the MAC
address from the LIFEBOOK to the monitor's network controller. To do this, activate the
corresponding function in the BIOS and in the advanced driver settings of your system.
Fujitsu
for further information.
for further information.
"BIOS settings for All-in-One
Additional information
63
Advertisement
Table of Contents
