Using The Temperature Setting Function - LG AMNW09GTUC0 Owner's Manual

Auto Changeover Mode - Setting
the Mode Change Temperature
Cooling & Heating Model
The Mode Change Temperature is the difference of
temperature when from cooling mode to heating mode
or from heating mode to cooling mode.
1 In Auto Operation Mode, Press the FUNC. button
to select Setting the Mode Change Temperature.
2 Press or button to set desired Mode
Change Temperautre.
• Default value is 2 °C
• Setting temp range: 1 °C ~ 7 °C

Using the Temperature Setting Function

Temperature setting
Use this function to adjust the desired temperature.
: Increase 1 ˚C or 1 ˚F each time pressed.
: Decrease 1 ˚C or 1 ˚F each time pressed.
NOTE
• 5 °C is proper for the difference between room and
outside temperature.
• Cooling operation
- The cooling mode doesn't work if the desired
temperature is higher than room temperature.
Please lower the desired temperature.
- Setting temp range: 18 °C ~ 30 °C
• Heating operation
- The heating mode doesn't work if the desired
temperature is lower than room temperature.
- Please increase the desired temperature.
- Setting temp range: 16 °C ~ 30 °C
NOTE
When setting temperature is 25 °C and room
temperature is 20 °C, then operating mode is
heating. If you set the mode change temperature to
2 °C, when the room temperature up to 27 °C(25
°C + 2 °C), the unit start cooling operation.
- When pressing the FAN SPEED button of the
remote controller for approx. 3 seconds, the
room temperature will be displayed for about 5
seconds before returning to the previous display
panel.
• Some functions may not be supported, depending
on the model.
Switching Between
Celsius/Fahrenheit
Press and hold the ROOM TEMP or FUNC. button
long for 5 seconds to change from Celsius to
Fahrenheit or from Fahrenheit to Celsius.
NOTE
• Some functions may not be supported, depending
on the model.
Operating Instructions
Owner's Manual 13