Kia Sportage Hybrid 2024 Owner's Manual page 459

Maintenance
Replacing rear fog lamp (Bulb
type)
ONQ5061108L
Operation
1. Turn off vehicle and disconnect the
battery connector.
2. Remove the bumper.
3. Loosen the light assembly retaining
screws with a cross-tip screw driver.
4. Disconnect the rear fog lamp connec -
tor.
5. Remove the socket from the assembly
by turning the socket counterclock -
wise until the tabs on the socket align
with the slots on the assembly.
6. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
7. Install the light assembly in the
reverse order of removal.
Replacing license plate lamp
(Bulb type)
ONQ5061038
Operation
1. Turn off vehicle and disconnect the
battery connector.
2. Using a screwdriver, gently pry the
lamp assembly.
3. Remove the bulb by pulling it straight
out.
4. Install a new bulb in the socket.
5. Install the lamp assembly.
CAUTION
Be careful not to dirty or damage the
lens, lens tab, and plastic housings.
Replacing map lamp (Bulb type)
ONQ5061039
Operation
1. Using a flat-blade screwdriver, gently
pry the lens cover from lamp housing.
2. Remove the bulb by pulling it straight
out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap the
lens into place.
Light bulbs
9
9 49