Kia Sportage Hybrid 2024 Owner's Manual page 274

Table of Contents

Advertisement

Driver assistance system
INFORMATION
僅 If you change the Warning Methods, it
can be applied to each function of the
driver assistance system. Please
check and change it in each function.
僅 If the vehicle is restarted, Warning
Methods will maintain the last setting.
僅 The setting menu may not exist based
on vehicle specification.
僅 The Warning Volume and Haptic
Warning cannot be turned off at the
same time. When one of the warning
is turned off the other is activated.
Blind-Spot Collision-Avoidance
Assist operation
Blind-Spot Collision-Avoidance Assist
will warn and control as following opera -
tion.
僅 Vehicle detection
僅 Collision warning
僅 Collision-Avoidance Assist
Vehicle detection
ONQ5041079
僅 Warning light will appear in the out -
side rear view mirror when the vehicle
on both lanes is detected from the
rear.
Vehicle detection will operate as follow -
ing circumstances.
僅 Vehicle speed: Above 20 km/h (12
mph)
僅 The speed of the vehicle in the blind
spot area: Above 10 km/h (7 mph)
7
34
Blind-Spot Collision-Avoidance Assist (BCA)
Collision warning
Collision warning will operate when the
turn signal to change the lane in the
direction of the vehicle in the blind spot
area.
僅 To warn the driver of a collision, the
warning light on the side view mirror
will blink. At the same time, an audible
warning will sound and the steering
wheel will vibrate (if equipped).
僅 When the turn signal is turned off or
you move away from the lane, the col -
lision warning will be cancelled and
the function will return to vehicle
detection state.
僅 Collision warning will operate as fol -
lowing circumstances:
- Your driving speed: Above 40 km/h
(25 mph)
- The speed of the vehicle in the
blind spot area: Above 10 km/h (7
mph)
NOTICE
If Warning only is selected from the Set -
tings menu, the collision warning will
operate when your vehicle approaches
the lane the blind spot vehicle is
detected.
WARNING
僅 The detecting range of the rear corner
radar is determined by a standard
road width, therefore, on a narrow
road, the function may detect other
vehicles in the two lanes away and
warn you. In contrast, on a wide road,
the function may not be able to detect
a vehicle driving in the next lane and
may not warn you.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents