Smart Cruise Control (Scc); 僅 Smart Cruise Control Settings; 僅 Smart Cruise Control Operation - Kia Sportage Hybrid 2024 Owner's Manual

Driver assistance system
Blind-Spot View Monitor mal -
function
When Blind-Spot View Monitor is not
working properly, or the cluster display
flickers, or the camera image does not
display normally, have Blind-Spot View
Monitor be inspected by a professional
workshop. Kia recommends visiting an
authorised Kia dealer/service partner.
WARNING
僅 The image shown on the cluster may
differ from the actual distance of the
object. Make sure to directly check the
vehicle's surroundings for safety.
僅 If the camera lens is covered with for -
eign material, the Blind-Spot View
Monitor may not operate normally.
Always keep the camera lens clean.
However, do not use chemical sol -
vents such as strong detergents con -
taining high alkaline or volatile
organic solvents (petrol, acetone etc.).
This may damage the camera lens.

Smart Cruise Control (SCC)

Smart Cruise Control (SCC) (if
equipped)
Smart Cruise Control is designed to
detect the vehicle ahead and help main -
tain the desired speed and minimum
distance with the vehicle ahead.
Overtaking Acceleration Assist
Whilst Smart Cruise Control is operating,
if the function judges that the driver is
determined to overtake the vehicle in
front, acceleration will be assisted.
Detecting sensor
Front view camera
ONQ5EP051040L
Front radar
ONQ5H041038
The front view camera and front radar
are used as a detecting sensor to detect
the vehicles in front.
Refer to the picture above for the
detailed location of the detecting sensor.
CAUTION
僅 Always keep the front view camera
and front radar in good condition to
maintain optimal performance of
Smart Cruise Control.
7
7 59