KTM 450 EXC-F 2024 Setup Instructions page 8

2 SETUP
6
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamp. Mount and tighten the screws
evenly.
Guideline
Screw, handlebar
clamp
Info
The markings on the handlebar should be at the center
of the handlebar clamp.
Keep the installed gap widths equal when tightening.
(All EU models)
–
Position the controls on the right half of the handlebar.
W00385-10
(XCF-W, XW-F)
–
Position the controls on the right half of the handlebar.
W00386-10
(All EU models)
–
Position the controls on the left handlebar half.
W00387-10
M8 20 Nm (14.8 lbf ft)