3.18
Installing the engine guard (EXC‑F SIX DAYS, XCF-W, XW-F)
3.19
Installing the frame protector
Alternative 2
UK battery charger XCharge‑professional
(00029095052)
Info
Follow the instructions of the charger and the manual.
–
Disconnect the battery charger after charging the 12-V battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Recharge the 12-V battery
regularly when the motorcy-
cle is not being used
Finishing work
–
Connect the negative cable of the 12-V battery. (
–
Mount the seat. (
–
Attach the engine guard on the frame at the rear and swing up
at the front.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
H01638-10
–
Position the left frame protector.
–
Insert the right frame protector from below and push it to the
rear.
–
Mount screws
Guideline
Screw, frame protec-
tor
–
Secure the frame protector with cable ties.
W00310-11
3 months
p. 21)
1
.
M6
10 Nm (7.4 lbf ft)
1
with the bushings and tighten.
M5
3 Nm (2.2 lbf ft)
WORK 3
p. 27)
31