Advertisement
–
Position the turn signal on the headlight mask on both
sides, mount nuts with washers and tighten.
–
Join plug-in connector
violet and brown cable colors of the turn signal cable har-
ness.
–
Join plug-in connector
the black and brown cable colors of the turn signal cable
harness.
–
Join plug-in connector
W00395-10
–
Connect plug-in connector
–
Install the headlight mask with the headlight. (
–
Disconnect tail light plug-in connector
harness.
–
Remove screws
W00396-10
–
Remove screws
–
Remove screws
–
Remove the license plate holder with the tail light.
Info
Pay attention to the cable of the tail light.
W00397-10
–
Loosen screws
fender.
–
Loosen screws
W00398-10
5
of the left turn signal using the
6
of the right turn signal using
7
of the headlight.
8
of the turn signal switch.
9
on the wiring
bk
.
bl
.
bm
.
bn
and remove license plate holder from
bo
and hang the tail light to the side.
SETUP 2
p. 18)
11
Advertisement
