KTM 450 EXC-F 2024 Setup Instructions page 7

(All except SIX DAYS)
–
Remove screws
–
Move the handlebar support in the desired position and
mount and tighten screws
Guideline
Screw, handle-
bar holder
Info
Position the handlebar support so that it is even.
W00324-11
(EXC‑F SIX DAYS)
–
Remove screws
–
Move the handlebar support in the desired position and
mount and tighten screws
Guideline
Screw, handle-
bar holder
Info
Position the handlebar support so that it is even.
W00323-11
Warning
Danger of accidents A repaired handlebar poses a
safety risk.
If the handlebar is bent or straightened, the mate-
rial becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged
or bent.
W00384-10
–
Position the handlebar.
3
and take off the handlebar support.
3
.
M10 40 Nm (29.5 lbf ft)
Loctite
3
and take off the handlebar support.
3
.
M10 40 Nm (29.5 lbf ft)
Loctite
SETUP 2
® 243™
® 243™
5