Advertisement
AX-242BK
Disassembly Procedures
M
Removing the Top Cover
1. Remove the 6 screws.
2. Remove the top cover by lifting
up its rear section.
He
Removing the Front Panel
1. Remove the top cover.
2. Remove the 3 plastic rivets ®
and the 3 screws © on the lower
part of the front panel.
M@
Removing the Power Transistor
1. Remove the top cover.
2. Remove the 4 screws ® holding
the heat-sink brackets .
~
3. Remove the PC Board from the fastener
©.
4. Remove the 9 screws ©,© on the
O
bottom plate.
5. Raise the front, rear panels and
(No.20262) 1-13
Advertisement
