IBM eServer xSeries 440 Installation Manual page 32

2. Install the SMP Expansion Module into the server.
22
xSeries 440: Installation Guide
e. Lift slightly on the locking levers and rotate them back until they stop.
Note: The illustrations in this document might differ slightly from your
hardware.
Locking
levers
a. Lift the SMP Expansion Module by its handle and use the finger relief to
hold the SMP module steady.
b. Being careful not to damage the components on the center plane, place the
SMP Expansion Module into the server.
c. Release the handle and slide the SMP Expansion Module toward the center
plane until it stops.
Handle
Locking
levers
Center plane
Handle