Table of Contents
Advertisement
Disable verbal instructions. This function is enabled by default.
Set whether you want an immediate announcement for the next maneuver after
each turn, or it is enough to receive the information when the turn is near.
Set the verbosity of the voice instructions, that is how much they tell and how often
they speak.
4.3.3 Warnings
You can enable and modify the following settings:
Button
Alpine USB Navigation is able to warn you if you exceed the current speed limit.
This information may not be available in your region, or may not be fully correct for
all roads on the map.
This setting lets you decide whether you wish to receive visible and/or audible
warnings.
The following warning types are available:
If you prefer to see the speed limit sign on the map all the time (normally, it is
shown only if you exceed the limit), you can set it here.
You can also set the relative speed above which the application initiates the
warning by adjusting a slider. The value can be different within and outside towns.
•
High: the voice instruction is given first relatively far from the next maneuver,
it is repeated when approaching the next turn, and it is repeated again right
before the actual maneuver.
•
Medium: the voice instruction is given when approaching the next maneuver
and it is repeated right before the maneuver.
•
Low: the voice instruction is given once right before the next maneuver.
•
Visual warning: the current speed limit is shown on the map when you
exceed it.
•
Audio and Visual warning: besides the current speed limit being shown on
the map, you also receive a verbal warning when you exceed the speed limit
with the set percentage.
Description
68
Advertisement
Table of Contents
