Installing The Memory Card - Minolta MN5KGP1 Manual

1. About Your Camcorder

1.1 Installing the Memory Card

Insert the included MicroSD memory card to record and store your videos and
photos. When the battery is low, media stored on the memory card will not be
erased. Please insert the MicroSD memory card by following the steps below:
1. Open the memory card door by pulling down at the top of the door with your
finger or a pointy object.
2. Insert the memory card. Ensure that the metal contacts are inserted first.
Push the memory card down until you hear an audible click.
The memory card can only be inserted in one way. Do not force the
card in if it will not go in smoothly.
3. Close the memory card door by pushing it back into position until it is flush
with the camcorder body.
4. To remove the memory card, simply push in and the card will eject back out.
NOTE:
Please format the memory card before using the
camcorder (Caution, this will erase all data on the card).
Do not remove or insert the memory card when recording. It
may damage the card or cause data loss.
Memory card rating must be Class U3 or above.
7