Minolta MN5KGP1 Manual page 49

. Using Your Camcorder
3. Select
4. Press the OK button to enter the Frequency submenu.
5. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (50 Hz, 60 Hz) the default frequency
for the United States is 60Hz.
6. Press the SHUTTER button to exit the settings menu.
2.9.4 Sounds
This function allows you to control the sounds of the camcorder.
1. In all Photo and Video Modes press and hold the OK button.
2. Press the POWER/MODE button so the gear icon is highlighted.
3. Select Sounds using the UP or DOWN buttons.
4. Press the OK button to enter the Sounds submenu.
5. You can change the following sounds from this submenu;
a. Shutter
video recorded.
b. Power-On
on and off.
c. Button
d. Volume
6. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option.
7. Press the SHUTTER button to exit the settings menu.
2.9.5 Mic Sensitivity
This function allows you to set the sensitivity of the microphone during video
recording.
1. In all Photo and Video Modes press and hold the OK button.
2. Press the POWER/MODE button so the gear icon is highlighted.
3. Select Mic Sensitivity using the UP or DOWN buttons.
4. Press the OK button to enter the Mic Sensitivity submenu.
5. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Low, Middle, High).
6. Press the SHUTTER button to exit the settings menu.
using the UP or DOWN buttons.
This is the sound made when an image is captured or a
this is the sound made when the camcorder is powered
this is the sound made when any button is pressed.
this controls the volume of all sounds on the camcorder.
48