Table of Contents

Advertisement

. Using Your Camcorder

2.10 Playback Mode

Videos and photos captured on your camcorder can be easily played back.
1. In All Photo and Video Modes press the POWER/MODE button to enter
the mode selection screen, then press the POWER/MODE again to enter
Playback mode.
2. Press the UP or DOWN buttons to cycle through the captured videos and
photos stored on the memory card.
3. While viewing a recorded video, press the OK button to start the video,
and press the OK button again to pause the video.
Press and hold the OK button to access the Playback mode settings. These
settings can be found below.
2.10.1
Delete
This function allows you to delete the current or all of the recorded media.
1. In Playback Mode press and hold the OK button.
2. Select Delete using the UP or DOWN buttons.
3. Press the OK button to enter the Delete submenu.
4. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Current, All).
5. Press the SHUTTER button to exit the settings menu.
NOTE: Deleted media cannot be recovered.
2.10.2
Protect
This function protects the photo/video file. The file will be protected from
being deleted accidentally. Files must be unprotected to be deleted.
1. In Playback Mode press and hold the OK button.
2. Select
3. Press the OK button to enter the Protect submenu.
4. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Protect This File, Unprotect This
File, Protect All, Unprotect All).
5. Press the SHUTTER button to exit the settings menu.
using the UP or DOWN buttons.
53

Advertisement

Table of Contents
loading

Table of Contents