Photo Shooting - Minolta MN5KGP1 Manual

. Using Your Camcorder
2.5

Photo Shooting

To enter Photo mode, power the camcorder on and press the POWER/MODE
button to access the mode selection screen and use the UP or DOWN buttons
to select the Photo icon and press the OK button to enter that mode.
1. Line up your shot by looking at the LCD screen to see what is in the shot.
2. Hold the camcorder steady and press the SHUTTER button to capture a
photo.
3. The number of photos that can be captured at a particular resolution will
be displayed in the bottom right corner of the screen.
4. The number of pictures remaining will be 0 if there is no memory card
will be shown at the screen when the memory card is full.
5. The number of remaining photos is determined by the selected photo
resolution. The higher the photo resolution, the lower the number of photos
you are able to be save to the memory card. Before capturing any photos,
you can select a preferred photo resolution.
Your camcorder comes preset with some user-adjustable settings to fine tune
and customize how you would like your videos to be captured. The settings
are already optimized and preset for the easiest experience.
From the main screen, press and hold the OK button until you see the
settings menu on the screen. You can also tap the screen and then select the
gear icon that shows on the screen to access the settings.
2.5.1 Resolution (Photo Size)
This function sets the photo resolution. The higher the resolution, the greater
the photo quality and the larger the file size of the photo.
1. In Photo Mode press and hold the OK button.
2. Select Resolution using the UP or DOWN buttons.
3. Press the OK button to enter the Resolution submenu.
4. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected resolution (20MP, 14MP, 10MP, 8MP,
5MP, 3MP, 2MP).
5. Press the SHUTTER button to exit the settings menu.
27