Ethernet - InFocus JTouch 50 Hardware Manual

Advanced settings

Ethernet

This is only available when when a LAN cable(RJ45) is connected to the display
• Enable the connection by selecting the Ethernet option to open the sub-menu.
• Change the toggle switch on the right-hand side to switch on the connection. It will change to a green
colour. (ethernet fig 1)
• The display will automatically search for a network and provide an IP address to the display.
If the display is to be assigned a "fixed" IP address, disable the option for "Obtaining IP Address Automatically
and populate the additional fields. This information should be obtained from your IT administrator
33 InFocus - JTouch 50 Hardware Guide
Note
ethernet fig 1
infocus.com | Always InFocus .