Safety Symbols And Descriptions - InFocus JTouch 50 Hardware Manual

Safety operation guideline

Safety symbols and descriptions

The following table lists the meaning of the safety symbols labelled on the Interactive Touch Display, remote control,
power cord and cables.
No. Symbol Mark
1
2
3
4
5
6
7
13 InFocus - JTouch 50 Hardware Guide
Standard / Description
IEC 60417 - Symbol No: 5009.
Stand-by - to identify the button to place the device in to Stand-by
condition.
IEC 60417 - Symbol No: 5002, Positioning of Cell and identification of
battery holder.
IEC 60417 - Symbol No. 5017, Earth.
To identify an earth (ground) terminal in cases where neither the
symbol 5019 is explicitly required.
IEC 60417 - Symbol No. 5019, Protected Earth.
To identify any terminal which is intended for connection to an
external conductor for protection against electric shock in case of a
fault, or the terminal of a protective earth (ground) electrode.
ISO 7000 - Symbol 0434B IEC 3864-B3.1, Caution.
To identify general caution when using the product.
IEC 60417, Caution Hot Surface.
To indicate that the marked item can be hot and should not be
touched without taking care.
IEC 60417 Symbol No. 6042 ISO 3864-B3.1, Caution Risk of Electric
Shock.
To identify equipment that has risk of electric shock.
infocus.com | Always InFocus .