Advanced Settings; Wireless And Network; Wifi - InFocus JTouch 50 Hardware Manual

Advanced settings

All advanced settings are found in the "settings" application which is opened from the sidebar menu. Some of
the settings may be opened using the shortcut icons as previously shown in "basic settings > display
shortcuts.

Wireless and Network

The display can be connected to a wireless and wired network.

WiFi

• Enable the connection by selecting the WiFi option to open the sub-menu.
• Change the toggle switch on the right-hand side to switch on the connection. It will change to a green
colour. (wifi fig 1)
• Once the connection is on, the network device will search for local WiFi networks and these will appear
below.
• Select the network of choice to open the password and Advanced details window.
• Enter the WiFi network password. (wifi fig 2)
• If any additional security settings are required, select the "advanced Settings" option and scroll down on
the page to display the Proxy and IP Settings options.
• The proxy details can be entered and would be provided by your IT administrator if required.
• If the display is to be assigned a "fixed" IP address, change the option from DHCP and complete the
additional settings. These will be provided by your IT administrator.
• Once all settings are complete, press "Connect"
The WiFi will connect to the network and show as connected on the main WiFi page
The WiFi can be switched to another network by following the above steps and can be switched off by
changing the toggle switch.
31 InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus .