Basic settings
Screen Adjustment
The display provides advanced settings for energy savings, brightness adjustment, dynamic contrast and eye
comfort. These settings are designed to reduce energy consumption and provide a greater user experience.
Each option can be manually switched on/off using the toggle switches on the right side of the image.
• Pixel shift is a function when the display is mostly used to display static content. This will adjust the pixels
periodically to keep the system running smoothly.
• Eye Comfort will reduce the blue light from the screen
• AutoLight will use the light sensor on the front of the display to automatically adjust the brightness of the
screen when the ambient light changes.
• SaveEnergy will use the light sensor and automatically save energy by switching to a black screen when
necessary according to the external light situation.
• If the ambient light of the whole machine is lower than 10 for 60 seconds continuously, no matter what
the situation, it will change the screen to a black screen and save energy
• When there is no signal channel, it will enter a black screen to save energy after sixty seconds, and
then shut down after another two minutes (this is regardless of how the ambient light changes at this
time).
• DCR adjust the contrast dynamically based on the content displayed on the screen
28
InFocus - JTouch 50 Hardware Guide
infocus.com | Always InFocus
.