Advertisement
Tuner sectio
FM stereo indicator (stereo)
7 Digital frequency display
This indicator automatically illuminates when an FM stereo
The reception frequency of the FM or AM broadcast selected
broadcast is being received.
by using the tuning buttons or the preset-tuning buttons is
Note: It will not illuminate if the FM mode selector is pressed.
indicated.
Remote-control signal indicator (remote)
Channel display
This indicator illuminates when the remote-controle
The channel number selected by the preset-tuning
transmitter is operated.
buttons is displayed.
Quartz-lock indicator (quartz lock)
¢ Memory indicator (memory)
<
Band selectors (band)
FM: Press this button to listen to an FM broadcast.
'AM: Press this button to listen to an AM broadcast.
allocation:
When the AM button is pressed for about 4 seconds,
the AM frequency step will change to 10 kHz per
step. (This step is set to 9 kHz before shipment.) In
order to return to the original frequency indication,
press this button for about 4 seconds again.
FM mode selector (FM mode)
Tuning buttons (tuning)
This unit automatically switches to the stereo mode when a
These buttons are used for tuning to the desired
stereo broadcast is received. Press this selector to listen
broadcast station.
in the monaural mode. The FM stereo indicator will not
illuminate in the monaural mode.
Memory button (memory)
This button is used when preset memory setting of the
preset-tuning buttons is made.
Preset-tuning buttons (1 ~0)
(24 ch random preset tuning)
These buttons are used to preset FM and AM broadcast frequen-
+ Remote-control signal sensor (remote sensor)
cies into the memory of this unit, and are also pressed to select
Receives the signals from the remote-control transmitter.
the desired preset frequencies.
Advertisement
