Advertisement
AM (MW) TUNER SECTION
DISASSEMBLY INSTRUCTIONS.
8,9
WIRING CONNECTION DIAGRAM.
m@ BEFORE REPAIR AND ADJUSTMENT
Power supply voltage
AC110V
AC127V
AC220V
AC240V
Consumed current 50/60Hz | 150 ~ 450mA | 100 ~ 400mA | 40~
190mA | 50 ~ 200mA
@ PROTECTION CIRCUITRY
The protection circuitry may have operated if either of the following conditions is noticed:
»%* No sound is heard when the power is switched ON.
%* Sound stops during a performance.
used.
If this occurs, follow the procedure outlined below:
1.Switch OFF the power.
2.Determine the cause of the problem and correct it.
3.Switch ON the power once again.
Note:
When the protection circuitry functions, the unit will not operate unless the power is first switched OFF and then ON
again.
FM indoor antenna (1)
* AM antenna holders (2)
* AM loop antenna(1)
Screws (2)
'SPB1152T
SSA270M (EX, EH)
5
= ig
Advertisement
