Attaching And Charging Optional Ni-Cd Battery Pack - Omega COMPACT CAL CA100 Owner's Manual

3
4
Power Rating
Rated supply voltage:
Permitted supply voltage range:
Rated supply voltage frequency:
Permitted supply voltage frequency range:
Maximum power consumption:
Rated output voltage for AC adapter:
Maximum rated output current for AC adapter:

Attaching and Charging Optional Ni-Cd Battery Pack

Attaching the Ni-Cd Battery Pack to the Main Unit
To attach the battery pack to the instrument, follow the next procedure:
18
AC adapter jack
Connect the power cord included in the AC power supply kit to the AC power
supply adapter.
Plug the other end of the power cord into an AC outlet that meets the following
conditions. The AC outlet must be a 3-slot grounded terminal.
3-prong AC outlet
• Before replacing the Ni-Cd battery pack, be sure to turn off the
power switch on the front panel and remove the power cord from
the AC outlet to avoid such possible hazards as short-circuiting
in the battery-charging circuitry.
• Use only an Ni-Cd battery pack from Omega.
AC adapter
Power cord
100 to 120 V AC/200 to 240 V AC
90 to 132 V AC/180 to 264 V AC
50/60 Hz
48 to 62 Hz
60 VA or below
15 V DC
1.33 A
WARNING
Free Datasheet http://www.datasheet-pdf.com/