Connections - Yamaha NS-P400 Owner's Manual

Never plug in the subwoofer and other audio/video components until all connections are completed.
• Connect the speakers to the speaker output terminals of
your amplifier with the provided speaker cords.
• Connect the speakers making sure not to reverse the
polarity (+, –). Connect the (+) terminals on both the
amplifier and the speakers using one side of the cord.
Connect the (–) terminals on both components using the
other side of the cord. If one speaker is connected with
reversed polarity, the sound will be unnatural and lack bass.
Right
Right
Main speakers
Note
This diagram shows an example of connecting speakers to an amplifier which has two sets of main speaker output terminals. If you
select this connecting way, make the amplifier output signals from both sets of main speaker output terminals.
This system can also be connected to the amplifier in other ways depending on the type of amplifier. Refer to pages 10 to 11 for
details.
8

CONNECTIONS

Effect speaker
REAR
SINGLE
Left
• For the main and effect speakers only
speaker to the left (marked L) terminals of your amplifier,
and another speaker to the right (marked R) terminals.
• The subwoofer can be connected to either the speaker
output terminals or the line output (pin jack) terminals of the
amplifier. Choose one of the ways shown in this section
which is suitable for your audio system. Also, refer to the
owner's manual for each component to be connected to this
unit.
Center speaker
Amplifier
REAR CENTER REAR
A
B
MAIN
CAUTION
SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
SPEAKERS
,
connect one
Effect speaker
Left
Subwoofer
OUTPUT
TO SPEAKERS
OUTPUT
TO SPEAKERS
FROM AMPLIFIER
INPUT1
FROM AMPLIFIER
INPUT1
To AC outlet
INPUT2 AUTO
POWER
ON OFF