Table of Contents
Advertisement
16
@ Adjusting a Part's Volume — Level
[Acceptable Values] 0 — 127
As the value is increased, the volume becomes louder.
<>
Press LEVEL <« or LEVEL »
to adjust the volume.
@ Adjusting a Part's Pan (Sound Image Orientation) — Pan
[Acceptable Values] rnd, L63 — 0 — r63
rnd (Random)
Provides a specialized effect, with the sound moved randomly back and
forth with each note played.
L1 — L63 (Left)
The sound image is oriented more toward the left side. The higher the
0
value, the more the image is moved to the left.
The sound image is oriented in the center.
rl —r63 (Right)
The sound image is oriented more toward the right side. The higher the
value, the more the image is moved to the right.
Press PAN «<4 or PAN
» to adjust the pan.
*
*
*
These panning effects will not be obtained when the unit is connected in mono.
With some sounds, you will still be able to perceive a small amount of the sound as
coming from the opposite speaker.
in emulating an actual piano, the P-55 localizes individual notes in varying degrees to
the right as they get higher in pitch. Similarly, the lower in pitch a note is, the more it
will be localized toward the left. When orienting the sound image using Pan, you are
setting the value for the center of this fairly broad overall image.
Advertisement
Table of Contents
