Wine Rack Handle Finish Application (Tr-30Dzw) - True RESIDENTIAL TR-30 Install Manual & User Manual

WINE R ACK HANDLE FINISH
APPLIC ATION ( TR-30DZ W)
See finish (e.g., paint or stain) for application
instructions and drying/curing times. Drying/Curing
times vary by finish. Follow recommended guidelines
associated with treating unfinished natural cherry
wood.
NO T E: R EMO V E T HE W INE R A CK H A ND L E S
F R OM T HE W INE R A CK A S SEMBLY BEF O R E
A P P LY ING F INI SH!
NO T E: F INI SH O D O R S F R OM PA NEL S
IN S TA L L ED BEF O R E F UL LY D RY ING /
CUR ING C A N L ING ER A ND BE A B S O R BED
BY T HE C A BINE T ' S IN T ER IO R .
R E SP ON SIBL E F O R L ING ER ING F INI SH O D O R S
IN SID E T HE UNI T.
R EQUIR ED T O O L S
• Phillips Screwdriver or Bit Driver
• Drill (optional)
S T Y L E #1
REMOVAL
1. Pull the wine rack forward.
2. Push the slide release tabs as indicated by the
release arrows (see fig. 1) and pull the wine rack
forward.
3. Remove the wine rack handle from the wine rack
assembly. See fig. 2.
INSTALLATION
1. Install the wine rack handle on the wine rack
assembly. See fig. 2.
2. Position the wine rack on the slides and carefully
push the wine rack towards the back of the unit.
S T Y L E # 2
REMOVAL
1. Pull the wine rack forward.
2. Remove the wine rack assembly screws. See fig. 3.
Then, lift the wine rack assembly from the slides.
3. Remove the wine rack handle from the wine rack
assembly. See fig. 2.
TEC_TM_009 REV. J_EN
P R I O R T O I N S T A L L A T I O N
INSTALLATION
1. Install the wine rack handle on the wine rack
2. Extend the slides.
3. Position the wine rack on the slides. Then, reinstall
T RUE I S NO T
FIG. 1.
FIG. 2.
FIG. 3.
10/06/2023
assembly. See fig. 2.
the wine rack assembly screws.
Push the left release tab up and the right release tab down.
Wine rack handle screw locations.
Wine rack assembly screw locations and screw closeup.
T R- 3 0 / 3 6 IN STA L L M A NUA L Page 19 of 80