Tuning Operations - Yamaha TX-470 Owner's Manual

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
AUTOMATIC TUNING
1
1
2
Select the reception band (FM or AM) while watching
the display.
FM/AM
3
TUNING MODE
AUTO/MAN'L MONO
Display information

TUNING OPERATIONS

3
2
POWER
FM or AM
4
Tune to a desired station.
To tune to a higher frequency, slightly turn the control
to the right. To tune to a lower frequency, slightly turn
the control to the left.
5
If the station where tuning search stopped is not the
desired one, follow step 4 again.
* If the tuning search does not stop at the desired
station, change to the MANUAL TUNING method as
described on the following page.
Displays the band and frequency of the received station.
Illuminates when an FM stereo broadcast with sufficient
signal strength is received.
Indicates the signal level of the received station.
4,5
TUNING
TUNING
7