Preset Tuning - Yamaha TX-470 Owner's Manual

This unit can store station frequencies (selected by tuning operation) by using the preset station buttons. With this function, you can
select any desired station by only pressing the corresponding preset station button. Up to 40 stations (8 stations x 5 pages) can be
stored.
1
To store stations
1
Tune to a desired station.
(Refer to page 7–8 for tuning procedure.)
2
Select a desired page (A – E) of preset station buttons
while watching the display.
A/B/C/D/E
3
MEMORY
MAN'L/AUTO FM
4
Press a preset station button before "MEMORY"
goes off from the display.
Shows the displayed station
has been programmed to A1.
* In the same way, program other stations to A2, A3 ... A8.
* You can program more stations to the preset station
buttons on other pages in the same way by selecting
other pages in step 2.

PRESET TUNING

2,1 1
3
Flashes on and off
for about 5 seconds.
4,2 2
(Preset station buttons)
To recall a preset station
1 1
Select the page of preset station buttons.
A/B/C/D/E
2 2
Select the desired preset station button.
Notes
A new setting can be programmed in place of the former
one.
For presets, the setting of the reception mode (stereo or
monaural) is stored along with the station frequency.
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if the POWER switch is set off or the
power plug is disconnected from the AC outlet or the power is
cut due to temporary power failure. If, however, the power is
cut for more than one week, the memory may be erased. If
so, it can be re-programmed by simply following the PRESET
TUNING steps.
9