Setting Remote Control Codes - Yamaha RX-V1500 Owner's Manual

REMOTE CONTROL FEATURES
Controlling optional components
(OPTN area)
OPTN is an additional component control area that can be
programmed with remote control functions independently
from any input source. This area is useful for
programming commands that are to be used only as a part
of a macro function or for components that do not have a
valid remote control code.
To select the OPTN control area, press n repeatedly until
OPTN appears in the display window.
Notes
• You cannot set a remote control code for this area. See page 68
to program buttons operated within this component control
area.
• The OPTN area cannot be used when AMP1Z or NO is selected
in the amplifier library (see page 67).
66

Setting remote control codes

You can control other components by setting the
appropriate remote control codes. Codes can be set up for
each input area.
The following table shows the default component
(Library: component category) and the remote control
code for each input area.
Remote Control Code Default Settings
Library
Input area (Component
category)
A
B TAPE
PHONO
TUNER TUNER
CD
MULTI CH
DVD
INPUT
V-AUX VCR
CBL/SAT CABLE
MD/TAPE
CD-R CD-R
DTV
VCR 1 VCR
DVR/VCR2 DVR
DVD DVD
*
Additional YAMAHA codes available are given in parentheses.
Note
You may not be able to operate your YAMAHA component even
if a YAMAHA remote control code is preset as listed above. In
this case, try setting another YAMAHA remote control code.
1
Set AMP/SOURCE/TV to SOURCE.
AMP
SOURCE
TV
Default YAMAHA
code *
LD 2200
2700, (2701)
TV –
2600, (0203, 1203,
1358, 2601)
CD 2300, (2301)
2102, (0517, 0566,
0572, 2100, 2101)
–
–
MD 2500, (2501, 2502)
2400
TV –
–
2807
2102, (0517, 0566,
0572, 2100, 2101)