Table of Contents
Advertisement
Tape Operation
Repeat Play
Set to playback a recording over and over.
Press ACTION*
to display menu.
Press AV
to select REPEAT
PLAY and press P to
set ON or OFF.
* Play repeats at tape
end or if unrecorded
portion over 30 sec.
is detected.
ER
TOR
Hrevral
Davy
REMOTE WARNING
ON
AUTO
SHUT - OFF
ON
E:
VOR S OUTPUTCH
3
SELECT:A #
SET:»
EXIL__¡ ACTION
Press
ACTION
to return to mormal screen.
To quickly return to a specified tape location.
Press DISPLAY during play
to display Counter.
Press RESET
COUNTER
at
desired position
to reset to "0:00:00".
3 Continue to record, playback, etc.
4 Press Stop.
Press CM/ZERO
in Stop mode
to start ZERO
SEARCH.
* Unit will go into FF
or REW mode and
stop at the last point
the Counter was set
to 0:00:00.
* If a blank portion exists on the
tape, and depending on the position
of the V mark, the V mark display
position may not be accurate.
Special VCR Features
Tape Position Display Feature
To find out the present tape position.
Tape position cannot be detected for VHS-C
Cassette type and tapes less than 60 minutes
in length.
Press TAPE POSITION
to detect tape position.
* "DETECTING
TAPE
POSITION" only
| DETECTING TAPE POSITION J
appears the first time
a cassette is inserted
J
and it takes several
seconds
for correct
indication to appear.
* The present tape
pops
position indication is
BEGIN
END
displayed.
Press TAPE
POSITION
to return to normal screen.
Remote Warning ON/OFF Feature
if Multi-brand feature is used (page 16), and this
feature is set to on, a warning appears whenever
an invalid key is pressed in TV mode.
Press
ACTION
to display menu.
Press AV
to select REMOTE
WARNING
and press »
to set ON or OFF.
* If "OFF,"
remote
warning will not
appear if invalid
key is pressed.
AUTO SHUT - OFF
¡ON
IDIOMA ANGUE : ENGLISH
VCR'S
OUTPUT CH
:3
SELECT:A ¥
SET:»
EXIT
¡ACTION _
Press ACTION
to return to normal screen.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Advertisement
Table of Contents
