Table of Contents
Advertisement
Multi-Brand Control Feature
Multi-Brand Control Setup
The Remote Control can be set to control some TV functions.
POWER
VCR
1 Find your TV Brand Code Number shown below.
TV
NUMBER
keys
E Setup for TV control,
-->hold down TV button,
-->enter code with number keys.
¢ If code number is100 or greater,
-->press 100 key, then other digits.
E.g., press 100 - 0 - 2 for 102.
ENTER
|
Confirm
code entry,
-->press POWER
to turn selected unit on or off.
. See table below for controllable functions in each mode.
Cc
* Repeat setup after remote battery replacement.
* Remote will not control every TV made by the
manufacturer listed. If you get no response, your
particular unit cannot be controlled. There are NO
additional codes for the products listed. If your
product is not listed, then the remote is not
compatible with that product.
Using Multi-Brand Control
After remote is set up,
you can select VCR or TV for the
desired function.
aki
Model VHQ-451
remote shown.
Press VCR or TV on the remote.
(Table below shows available unit buttons for each mode.)
VOL UP/DOWN
VCR/TV, PLAY, STOP EJECT, SAP/ Hi-Fi (VHQ-451
POWER,
INPUT, number
only), DISPLAY, FF, REW, PAUSE/SLOW, REC, SPEED, | keys, ENTER, CH UP/
CM/ZERO, RESET COUNTER, TAPE POSITION
DOWN, VOL UP/DOWN
¢ Not all functions listed may be controllable.
*
In Ane mode, it may be necessary to press ENTER
after pressing number keys for channe!
selection.
TV Brand Code Numbers
Hita iia
Mitsubishi
Samsung
Gold Star
Important Notes
* Due to changes in infra-red commands used by manufacturers, some brands have several
codes. If your unit does not respond to the first code, please try the next one.
« Some TY brands require you to turn on the power manually.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Advertisement
Table of Contents
