Record On A Tape - Quasar VHQ-401 Operating Instructions Manual

"Important: lf a remote control button does not wor
Record On a Tape etapa cols e e g a l
[A Ready Check List
O Al connections are made (pg. 8, 17).
D TV and VCR are plugged in.
O TV is on and tuned to CH3, 4, or VIDEO.
LJ Remote is in VCR mode. (Press VCR)
VCR/ Insert tape with rec. tab (pg. 4).
e VCR power comes on.
"VCR" lights on Multi Function Display.
Press CH AY, or number keys
to select channel.
* For "LINE" input, see pg. 24.
* For channels over 100, press 100 key then
STOP press the remaining 2 digits.
SPEED
g
PAUSE/ Press SPEED
SLOW to select record speed (pg. 4).
CHA SP = Standard Play LP = Long Play
SLP = Super Long Play
CH Y ¢ Speed appears on-screen.
REC
xo] Bo
O
Lo
D
=
0)
=.
a)
3
Press REC
to start record.
+ To edit out unwanted scenes, press PAUSE/
SLOW to pause, and again to resume recording.
Press STOP
to stop record.
Model VHQ-451 remote shown.
f One Touch Recording (record in progress),
- * VCR shuts off after preset record length.
Record using VCR controls --> each press of REC adds 30 min. to
record length up to 4 hours.
MM Record one station, watch another,
--> press VCR/TV ("VCR" goes out on Multi
Function Display),
--> select channels at TV (recording
continues).
2 Select 1 Insert 4 Press REC
Channel. a cassette. to start
Recording.
* Watching one channel and
recording another is NOT
possible when using a Cable
Box or a Satellite Receiver.
w select channels at VCR,
Other channels cannot be viewed during
This video recorder, equipped with HQ recording.
(High Quality) system, is compatible --> press VCR/TV ("VCR" lights on Multi
with existing VHS equipment. Only use Function Display),
tapes with the NES] mark. Only tapes --> select channels at VCR.
tested and inspected for use in 2, 4, 6,
and 8 hour machines are ree
recommended. * After 5 min. in Pause mode, stops to
Cc protect tape and video head,
13