Remote Control Features; Using Remote Control On The Scene Feature - Yamaha HTR-6040 Owner's Manual

In addition to controlling this unit, the remote control can also operate other audiovisual components made by Yamaha
and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code
for each input source (see page 62).

Using remote control on the SCENE feature

■ Controlling the input source
components in the SCENE mode
You can operate both this unit and the input source
component by using the remote control. You must set the
appropriate remote control code for each input source in
advance (see page 62).
Press the desired F SCENE button on the
1
remote control.
2
Press the desired buttons in the * area below
to control the input source component of the
selected SCENE template.
CODE SET
POWER POWER
TV AV
MD
CD CD-R
CBL
DVD DTV
DOCK
V-AUX DVR
TV VOL TV CH
*
TV MUTE TV INPUT
MUSIC ENTERTAIN
1 2
ENHANCER STRAIGHT
5 6
SUR. DECODE NIGHT
9 0
LEVEL
TITLE
BAND
RETURN
XM MEMORY
REC
1 2
Note
*
These buttons control the input source component. See page 61
for details of the function of each button.

Remote control features

TRANSMIT
STANDBY POWER
MULTI CH IN AUDIO SEL
TUNER XM
AMP
Set to
SOURCE
VOLUME
SOURCE
TV
MUTE
MODE STEREO
3 4
DIRECT ST.
7 8
SLEEP
+10 ENT
PRESET/CH
SET MENU
MENU
SRCH MODE
ENTER
A-E/CAT.
DISPLAY
SCENE
SCENE
3 4
buttons
■ Setting input source of the customized
SCENE template on the remote control
If you customize the input source of the selected SCENE
template, you must set the input source of the SCENE
template on the remote control to operate the input source
component correctly.
Press the desired F SCENE button on the
1
remote control.
Press and hold the F SCENE button and the
2
desired input selector button (A) for 3
seconds.
When the setting of the input source is successful, the
V TRANSMIT
indicator flashes twice.
3
Keep holding down the buttons pressed in
step 2 until the V TRANSMIT indicator
flashes twice again.
Note
If the setting of the input source is not successful, the
V TRANSMIT indicator flashes repeatedly. In this case,
carry out the step 1 and 2 again.
Remote control features
59
En