Selecting The Scene Templates; Selecting The Desired Scene Template - Yamaha HTR-6040 Owner's Manual

SELECTING THE SCENE TEMPLATES

This unit is equipped with 16 preset SCENE templates for
various situations of using this unit. As the initial factory
setting, the following SCENE templates are assigned to
each SCENE button:
SCENE 1: DVD Viewing
SCENE 2: Disc Listening
SCENE 3: TV Viewing
SCENE 4: Radio Listening
If you want to use other SCENE templates, you can select
the desired SCENE templates from the SCENE template
library and assign the templates to the selected SCENE
buttons on the front panel and the remote control.
Select the desired SCENE
template
SCENE template library
(Image)
Selecting the desired SCENE
template
Press and hold the desired F SCENE (or
1
F SCENE) button for 3 seconds.
The indicator on the selected SCENE button on the
front panel starts to flash, and the name of the
currently assigned SCENE template appears in the
front panel display.
3 seconds
1
Front panel
Flashes
DVD Viewing
26
En
Selecting the SCENE templates
1
Assign the
SCENE
template to the
SCENE button
3 seconds
1
or
Remote control
1
Press D INPUT l / h (or set the operation
2
mode selector ( K ) to AMP and then press
D l / h) to select the desired template.
l
INPUT
Front panel
AMP
SOURCE
TV
Remote control
DVD Movie View
Press the F SCENE (or F SCENE) button
3
again to confirm the selection.
The selected SCENE template is assigned to the
button.
1
Front panel
Notes
• If you do not carry out any operation within 30 seconds from
the last operation in these steps, this procedure is automatically
canceled.
• Once the desired SCENE templates are assigned to the
corresponding SCENE buttons, you may need to set the input
source of the SCENE template on the remote control. See
page 59 for details.
h
or
PRESET/CH
ENTER
A-E/CAT.
1
or
Remote control