SET MENU
Using SET MENU
Use the remote control to access and adjust each
parameter.
TV
VOL
MUTE
STEREO
1
STANDARD
SELECT
5
A
SPEAKERS
9
LEVEL
TITLE
BAND
A-E/CAT.
RETURN
MEMORY
y
You can change SET MENU parameters while the unit is
reproducing sound.
Note
You cannot change some SET MENU parameters while the unit
is in either cinema or music night listening mode.
1
Press AMP.
2
Press SET MENU.
"BASIC SETUP" appears in the front panel display.
3
Press u / d to display MANUAL SETUP.
MANUAL SETUP
4
Press ENTER to enter MANUAL SETUP.
1 SOUND MENU appears in the front panel display.
1 SOUND MENU
5
Press u / d to display the desired menu.
1 SOUND MENU
2 INPUT MENU
3 OPTION MENU
54
AMP
1
CH
VOLUME
INPUT
MUTE
MUSIC
ENTERTAIN
MOVIE
2
3
4
EXTD SUR.
DIRECT ST.
6
7
8
B
NIGHT
STRAIGHT
0
10
ENT.
SET MENU
2,8
MENU
SRCH MODE
ENTER
A-E/CAT.
DISPLAY
3-7
PRESET/CH
6
Press ENTER to enter the displayed menu.
Repeat steps 5 and 6 to navigate to and enter the
items you want to adjust.
To return to the previous menu level, press RETURN.
7
Press u / d to select the item you want to
adjust, then press j / i to change the setting
of the item.
Repeat this operation to select and adjust each setting.
To return to the previous menu level, press RETURN.
8
To exit, press SET MENU when finished.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.