Yamaha HTR-5835 Owner's Manual page 33

Listening to high fidelity stereo sound
(Direct Stereo)
Direct Stereo allows you to bypass this unit's decoders and
DSP processors to enjoy pure high fidelity sound from 2-
channel PCM and analog sources.
Press PROGRAM l / h repeatedly (or press
AMP to select the AMP mode, then press DIRECT
ST.) to select "Direct Stereo".
l h
PROGRAM
or
Front panel
DIRECT STEREO
Notes
• To avoid unexpected noise, do not play DTS-encoded CDs in
this mode.
• When multi-channel signals (Dolby Digital and DTS) are input,
this unit automatically switches to the corresponding analog
input. (When DTS is selected as an input mode, no sound will
be heard.)
• No sound will be output from the subwoofer.
• TONE CONTROL (page 25) and SET MENU (page 53)
settings are not effective.
• The front panel display automatically dims.
• If you press AMP on the remote control to select the AMP
mode, then press DIRECT ST., the unit automatically enters the
Direct Stereo mode and you cannot toggle between the unit's
other sound field programs.
Night listening modes
The night listening modes are designed to improve
listenability at lower volumes or at night. Choose either
NIGHT:CINEMA or NIGHT:MUSIC depending on the
type of material you are playing.
Press AMP to select the AMP mode, then press
NIGHT repeatedly on the remote control to select
cinema or music.
When night listening is selected, the NIGHT indicator in
the front panel display lights up.
AMP
• Select NIGHT:CINEMA when watching films to
reduce the dynamic range of film soundtracks and
make dialog easier to hear at lower volumes.
• Select NIGHT:MUSIC when listening to music sources
to preserve ease-of-listening for all sounds.
• Select OFF if you do not want to use this function.
DIRECT ST.
AMP
8
Remote control
NIGHT
10
Press j / i to adjust the effect level while
NIGHT:CINEMA or NIGHT:MUSIC is displayed.
This adjusts the level of compression.
A-E/CAT.
PRESET/CH
Remote control
Effect.Lvl:MID
• Select MIN for minimum compression.
• Select MID for standard compression.
• Select MAX for maximum compression.
y
NIGHT:CINEMA and NIGHT:MUSIC adjustments are stored
independently.
Notes
• You cannot use the night listening modes with the Direct Stereo
program or MULTI CH INPUT (even though the NIGHT
indicator lights up when Direct Stereo is selected).
• The night listening modes may vary in effectiveness depending
on the input source and surround sound settings you use.
Downmixing to 2 channels
You can enjoy 2-channel stereo playback even from multi-
channel sources.
Press PROGRAM l / h repeatedly (or press
AMP to select the AMP mode, then press
STEREO on the remote control) to select 2ch
Stereo.
l h
PROGRAM
or
Front panel
2ch Stereo
y
You can use a subwoofer with this program when SWFR or
BOTH is selected in "BASS OUT".
PLAYBACK
ENTER
A-E/CAT.
STEREO
AMP
1
Remote control
29